|
Fluke Cases etc
 |
| Preferred Case for Larger Meters |
|
GST inclusive price for Australian Customers is AUD$60.50 |
| |
| |
| |
| |
|
Zippered carrying case with detachable external pouch.
Compatible with these series of Fluke meters:
110, 16, 20, 70, 170, 80, 180, 123, 712/713, 725, 787/789.
|
 |
| |
|
GST inclusive price for Australian Customers is AUD$27.50 |
| |
| |
| |
| |
|
Snap-on holster for 10, 11 & 12 meters.
Absorbs shocks and protects the meter from rough handling. Built-in stand and hanger-loop allow meter positioning. Molded hanger-loop can also function as stationary probe holder, allowing one-handed operation and contact of test points.
|
 |
| |
|
GST inclusive price for Australian Customers is AUD$30.80 |
| |
| |
| |
| |
|
Soft sided, zippered, vinyl carrying case for 10, 11 & 12 meters.
Inside pockets are designed to carry a meter, manual, and test leads. Convenient 3" (76 mm) belt loop accommodates tool belts.
|
 |
| |
|
AUD$71.50 inc GST for Australian Customers |
| |
| |
| |
| |
|
Heavy duty hard case made of shock resistant polypropylene. Top cover snaps on back to serve as tilt stand. Carrying handle and storage compartment for test leads and small accessories are part of case. For Fluke 25 and 27, also holds 80 Series meters in holsters.
|
 |
| |
|
GST inclusive price for Australian Customers is AUD$55.00 |
| |
| |
| |
| |
|
Large vinyl soft case with water resistant zipper and one inside pocket for test leads or small accessories.
Convenient 3" (76 mm) belt loop accommodates tool belts.
For Fluke 20, 50 or 70 Series meters in C70 Holster; or 80 Series meters in C81 Holster. Also for use with PV350.
Size: 8.3" H x 4.9" L x 2.75" D
(18.4 mm H x 124.5 mm L x 69.8 mm D).
|
 |
| |
|
GST inclusive price for Australian Customers is AUD$38.50 |
| |
| |
| |
| |
|
Vinyl case with snap-on belt loop.
Holds meter, manual, and leads ready for testing.
For 21, 23, 29, 50 and 70 Series without holster.
(Use C25 or C90 when using meter with holster.)
|
 |
| Heavy Duty Leather Case |
|
GST inclusive price for Australian Customers is AUD$682.50 |
| |
| |
| |
| |
|
Oiled, top grain cowhide for long life
Heavy duty stitching and riveted construction
Large belt loop and top flap for securing your meter
Holds most Fluke DMMs, Thermometers and Process Meters
Size (H x L x W): 2.25" x 9.25" x 5" (57.15 mm x 234.95 mm x 127 mm)
|
 |
| |
|
GST inclusive price for Australian Customers is AUD$44.00 |
| |
| |
| |
| |
|
Fabric-backed vinyl case with zippered enclosure. One internal pocket holds test leads or small accessories. Convenient 3" (76 mm) belt loop accommodates tool belts. For use with 8060A and 8062A. Also holds Fluke 21, 23, 29, 50 and 70 Series meters in a C70 holster. Smaller than a C25.
|
 |
| |
|
GST inclusive price for Australian Customers is AUD$17.60 |
| |
| |
| |
| |
|
Vinyl carrying case with two inside pockets. Designed to carry test leads, test probes or clips. Will not accommodate large probes or AC83 Test Clips. Size: 7.25" x 4.25" x 1.25" (190.5 mm x 108 mm x 31.8 mm).
|
 |
| |
|
AUD$66.00 inc GST for Australian Customers |
| |
| |
| |
| |
|
Smaller than C100.
Double seal latches resist popping open if case is dropped. Includes compartments for holding accessories and manuals. Detachable lid for easy storage. Designed for 80 Series meters in holsters. 70 Series and 21, 23, 29, 70 meters in holsters fit loosely.
|
 |
| |
|
AUD$71.50 inc GST for Australian Customers |
| |
| |
| |
| |
|
Tough polypropylene hard case provides protection against rough handling and bad weather. For any Fluke handheld DMM or Fluke 50 Series thermometers, except the Series 10 and 860 Series, and most Fluke DMM accessories.
|
 |
| |
|
AUD$37.40 inc GST for Australian Customers |
| |
| |
| |
| |
|
Easy-to-clean, vinyl snap-on holster absorbs shocks and protects meter.
Lead and probe storage on back. Unique Flex-Stand™ allows meter to hang, lean or stand in best viewing position.
For 80 Series II & III DMMs & can be also used on 75,77,79 series III meters.
|
 |
| |
|
AUD$37.40 inc GST for Australian Customers |
| |
| |
| |
| |
|
Easy-to-clean, vinyl snap-on holster absorbs shocks and protects meter.
Unique Flex-Stand™ allows meter to hang, lean or stand for best viewing position.
Lead/probe storage on back. In high-visibility yellow.
For all 70 and 50 Series and Models 21, 23, 29 meters.
|
 |
| |
|
GST inclusive price for Australian Customers is AUD$55.00 |
| |
| |
| |
| |
|
Now you can hang your meter almost anywhere with the new Fluke ToolPak™ accessories kit. ToolPak includes a universal hanger, a magnet, and 9-inch (43 cm) and 17-inch (23 cm) "hook-and-loop" hanger straps.
ToolPak™ is designed to work with:
180 Series Digital Multimeters
70 Series III Digital Multimeters
50 Series II Digital Thermometers
725 Multifunction Calibrator
The special magnet accessory is designed to connect to either of the straps. The strong magnet accessory will attach to an electrical panel, a metal doorjamb or any other ferrous-type metal
|
 |
|
Protect your Investment ! |
|
AUD$33.00 inc GST for Australian Customers |
| |
| |
| |
| |
|
Now you can take long-term, unattended measurements without the fear of your meter being "borrowed."
LockPak is a new security accessory that fits into the back of a Fluke 180 series & 724 & 725 calibrators. When combined with a cable and padlock, the meter is secured in place to reduce the threat of theft or loss.
LockPak is designed for use similar to lockout, tagout procedures, and is especially useful for long term, unattended logging situations with the Fluke 189 digital multimeter.
|
|
