|
 |
|
Automotive Multimeters
 |
| A complete automotive diagnostic package |
|
GST inclusive price for Australian Customers is AUD$1,039.50 |
| |
| |
| |
| |
|
A complete automotive diagnostic package with everything you need in an automotive multimeter
The new Fluke 88V has improved measurement functions, troubleshooting features and accuracy to solve more problems on conventional and hybrid vehicles.
The 88V is made in the U.S.A. and carries the industry leading lifetime warranty.
The Fluke 88V operates very similar to the classic Fluke 88, but with more problem solving power, safety, convenience and impact protection.
Combo Kit Includes: Fluke 88V multimeter, TL224 silicone test leads, AC285 long reach alligator clips, TP220 test probes, RPM 80 inductive RPM pick-up, magnet and strap, 80BK temperature probe, two automotive backprobe pins, insulation piercing probe, C800 durable carrying case, holster, 9V battery (installed), Getting Started Manual, and CD with detailed manual.
Specifications:
- DCV Maximum Voltage: 1000V
- ACV Maximum Voltage: 1000V
- DC Current Maximum Amps: 10A
- AC Current Maximum Amps: 10A
- Maximum Resistance: 50 MegOhm
- Maximum Capacitance: 9,999 µF
- Maximum Frequency: 200 KHz
- Maximum Duty Cycle: 99.9 %
- Temperature Measurement
-200.0°C - 1090°C
-328.0°F - 1994.0°F, 1.0% excluding probe
80 BK Temperature Probe
-40 °C - 260 °C
-40 °F - 500 °F, 2.2 °C or 2% whichever is greater
- Maximum Conductance: 60.00 nS
|
 |
|
Includes inductive pick-up probe, test leads, test lead extender tips, threaded alligator clips, type k temperature probe |
| |
|
GST inclusive price for
Australian Customers is AUD$330.00 |
| |
| |
| |
|
Amprobe AU92 igital Automotive Multimeter
Model AU92 is a full featured multimeter that has additional measurement features for auto-motive servicing. It offers a built-in thermometer and tests engine RPM and dwell as wellas standard multimeter features of voltage, current, resistance and continuity.
- Performs all standard electrical test for on-car and bench troubleshooting including tach, dwell, volts, ohms & diode
- Tests engine RPM and dwell
- Measures AC/DC voltage, DC current, resistance, diodes and continuity beeper
- Accurate RPM measurements for 2- and 4-stroke automotive engines using the Inductive Pickup
- Locate faulty wiring and components
- Data Hold button retains display data
- Duty cycle and direct DWELL reading
- High impact over-molded case
- Includes inductive pick-up probe, test leads, test lead extender tips, threaded alligator clips, type k temperature probe, spare fuse
SPECIFICATION
Function:
DC Voltage
Measurements: 400 mV, 4V, 40V, 400V, 600V ±(1.0% rdg + 2 dgts)
Resolution 0.1 mV
Overload protection 600 VDC or AC rms
AC Voltage
Measurements 400 mV, 4V, 40V, 400V, 600V ±(2.0% rdg + 5 digits)
Resolution 0.1 mV
DC Current
Measurements 400 µA, 4000 µA, 40 mA, 400 mA, 10A ±(2.0% rdg + 2 digits)
10 A range ±(3.0% rdg + 3 digits)
0.5 A / 500V fast blow ceramic fuse (FP520)
10 A / 500 V fast blow ceramic fuse (FP540)
AC Current
Measurements 400 uA, 4000 uA, 40 mA, 400 mA, 10 A ±(2.5% rdg + 5 digits)
10 A range ±(3.5% rdg + 5 digits)
0.5 A / 500V fast blow ceramic fuse (FP520)
10 A / 500 V fast blow ceramic fuse (FP540)
Frequency (Hz) (50-500 Hz)
Resolution 1Hz ±(0.1% rdg + 3 dgts)
Sensitivity 10Hz ~ 400kHz: > 3.5Vrms
Minimum pulse width > 2.5us
Duty cycle limits >30% and less than
Overload protection 600 VDC or AC RMS
Temperature
Ranges -20°C ~ 1000°C,
Resolution 0.1°C, 0.1°F
-20°C ~ 10°C ±(2.0% rdg + 4°C)
10°C ~ 200°C ±(1.0% rdg + 3°C)
-20°C ~ 10°C ±(2.0% rdg + 4°C)
200°C ~ 1000°C ±(3.0% rdg + 2°C)
Sensor type K-type thermocouple
Overload protection 600 VDC or AC RMS
RPM
Ranges: RPM 600 ~ 4000 RPM
X10 RPM 4000 ~ 12000 RPM
Resolution 1 RPM ±(2% rdg + 4 dgts)
Effect Reading > 600 RPM
Overload protection 600 VDC or AC RMS
% Duty Cycle
Number of Cylinders 4, 5, 6, 8
Cylinder Accuracy 4 CYL 0 ~ 90.0°
5 CYL 0 ~ 72.0°
6 CYL 0 ~ 60.0°
8 CYL 0 ~ 45.0°
Resolution 0.1° ±(2% rdg + 5 dgts)
Overload protection 600 VDC or AC RMS
Continuity
Audible indication: Less than 25 ohm
Response time 500ms
Overload protection 600 VDC or AC RMS
Diode Test
Test current
1.0mA (approximate) ±(3.0% rdg + 3 dgts)
Audible indication less than 0.25VDC
Open circuit volts 3.0VDC typical
Overload protection 600VDC or AC RMS
General Specifications
Display 3 3/4 digit liquid crystal display (LCD) with a maximum reading of 3999.
Polarity Automatic, positive implied, negative polarity indication.
Overrange (OL) or (-OL) is displayed.
Zero Automatic
Low battery indication is displayed when the battery voltage drops below the operating level
Measurement rate 2 times per second, nominal.
Auto power off Approx. 10 minutes.
Operating environment 0°C to 50°C at less than 70% RH.
Storage temperature -20°C to 60°C at less than 80% RH.
Accuracy Stated accuracy at 23°C ± 5°C, less than 75% RH.
Temperature Coefficient 0.1 ×(specified accuracy) per°C.(0°C to 18°C, 28°C to 50°C)
Altitude 2000m, indoor operation
Power Standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.
Battery life 150 hours typical with carbon zinc.
Dimensions 165 × 78 × 50 mm
Weight Approx. 315g . including holster.
|
 |
| Automotive Multimeter |
|
AUD$434.50 inc GST for Australian Customers |
| |
| |
| |
| |
|
This is the Digital Multimeter for the Professional Automotive Technician who wants a full featured DMM that is both accurate and inexpensive. The CIE 8088 measures the basic automotive parameters plus capacitance and temperature and is equipped with an inductive pick up probe, temperature probe and a rugged test lead set.
3 3/4 Digit, 4000 Count Display
Full Autoranging on DC/AC Volts, Capacitance and Frequency Diode and Continuity Test
Reads Pulse Duty Cycle & Dwell
Reads RPM
Frequency and Capacitance
Automatic Power Down Shielded for EMI
Complete with:
Heavy Duty Test Lead Set,
HA100 inductive pick-up, Protective Blue Holster &
Comprehensive, Easy to Understand Users Manual
|
 |
|
Measure Pressure with your Multimeter |
| |
|
GST inclusive price for Australian Customers is AUD$654.50 |
| |
| |
| |
|
Fluke digital pressure and vacuum measurements from a single module.
* Measures HVAC/R, hydraulic and pneumatic pressures to 500 psig (3447 kPa)
* Measures to 29.9" Hg (76 cm Hg), (Not intended for measuring microns of vacuum)
* Compatible with most popular digital multimeters
|
|
TP40 Automotive Back Probe Pins | $55.00
|
 |
|
A "must-have" for fuel injectors, TPS and MAP sensors |
| |
|
GST inclusive price for Australian Customers is AUD$60.50 |
| |
| |
| |
|
Fluke TP40 Automotive Back Probe Pins (x five)
Flexible and formable 1-¼ inch pin provides an easy connection past weather pack seals to connector conductors.
Tested to over 60 VDC, these pins are , as well as for any underhood or under vehicle connector with weather pack seals.
The bright yellow body stands out in an engine compartment to ensure they are not left behind.
Easily connects to test leads that have removable ends such as the TL224.
Banana jack accepts all DMM and banana jack leads
Tested to 60 V DC
|
 |
| Protect Your Multimeter |
| |
|
GST inclusive price for
Australian Customers is AUD$27.50 |
| |
| |
| |
|
Grey zippered soft carry case for multimeters.
Has strong stiching and internal padding for longer life.
Approximate size 100mm (w) x 220mm (L) x 50mm (H).
|
|
